Panopto Help & Support

Recording in the Eight ‘Video-Enabled’ Panopto Rooms on Campus

This short guide details how to record using Panopto in the eight ‘video-enabled’ Panopto rooms on campus (N.B please use Panopto for Windows and NOT Panopto Capture, a Panopto for Windows has has the mics correctly configured by ICT).

Recording in these spaces works exactly the same as the other teaching spaces on campus. For full details on how to record using Panopto see this short guide (web link) or video resource (YouTube video).

The correct default settings should be automatically set up for you already and you should not need to change anything.

However, should the default mic settings in these rooms have changed for any reason, please do check audio levels by speaking into the mic and checking to see if the coloured bands respond to your voice.

If the coloured bands do not move, please adjust the choice of mic to the correct settings for your room. See below.

To view the specific settings for you room click the relevant room code below:

DCB1101

Audio Default Setting: Line In (Realtek High Definition Audio)

The below image shows the standard settings for DCB1101. While these settings should be automatically chosen for you, you may wish to check them or refer to them if you have a technical issue.

Please note that microphone needs turning the phantom power on for sound capture

INB0114

Audio Default Setting: Microphone (3-Samson UB1)

The below image shows the standard settings for INB0114. While these settings should be automatically chosen for you, you may wish to check them or refer to them if you have a technical issue.

MB0302

Audio Default Setting: Microphone (Samson UB1)

The below image shows the standard settings for MB0302. While these settings should be automatically chosen for you, you may wish to check them or refer to them if you have a technical issue.

MB0306

Audio Default Setting: Line In (Synaptics HD Audio)

The below image shows the standard settings for MB0312. While these settings should be automatically chosen for you, you may wish to check them or refer to them if you have a technical issue.

MB0603

Audio Default Setting: Microphone (Samson UB1)

The below image shows the standard settings for MB0603. While these settings should be automatically chosen for you, you may wish to check them or refer to them if you have a technical issue.

NDH02020

Audio Default Setting: Microphone (2-Samson UB1)

The below image shows the standard settings for NDH02020. While these settings should be automatically chosen for you, you may wish to check them or refer to them if you have a technical issue.

NDH1010

Audio Default Setting: Line In (USB Capture HDMI 4K+ Mic)

The below image shows the standard settings for NDH1010. While these settings should be automatically chosen for you, you may wish to check them or refer to them if you have a technical issue.

SLB0006

Audio Default Setting: Line In (Synaptics HD Audio)

The below image shows the standard settings for SLB0006. While these settings should be automatically chosen for you, you may wish to check them or refer to them if you have a technical issue.